Whites MXT Manual do Utilizador Página 18
- Página / 40
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
16
Chapter 5 MXT Controls
TRAC TOGGLE
TRAC Toggle
The TRAC toggle selects the type of ground
mineral rejection (ground balance) and automatic
tracking to ground mineral changes best suited to
the specific area. Three different positions each for
a specific ground condition (ground type) are
provided.
The Ground position is used for normal or typical
ground conditions. In this position the MXT will
quickly compensate for ground minerals in a few
pumps of the search coil over the ground being
searched and quickly (automatically) track to any
ground changes as you sweep the search coil during
searching. For most operators the Ground position
will be used for over 90% of your searching condi-
tions.
The Lock position monitors, however, doesn't track
to changing ground conditions. Man made iron
decomposes to the point of tricking the Ground and
Salt position tracking into thinking it is a mineral-
ized part of the ground. This can create noise and
instability during searching as the tracking system
bounces radically up and down the scale, always
searching for a good ground rejection setting and is
never able to find it. This makes it difficult for an
operator to recognize worthwhile targets and/or run
at the higher performance GAIN settings. In these
conditions it is recommended to first go to the
Ground position and pump the search coil over a
clean area of ground representative of the area (free
of man made iron) then switch the TRAC control to
Lock. By doing so stability and success searching
these trashy areas will improve dramatically. Be-
cause ground changes are monitored during Lock,
once an operator switches back to either Ground or
Salt tracking positions, updates to an appropriate
ground setting are virtually instantaneous.
Chapter 5 MXT Controls
- MXT Table of Contents 3
- Assembly 4
- Assembly Instructions 5
- Batteries 6
- Rechargeable Battery (Opt.) 7
- MXT Quick Start 8
- Chapter 3 MXT Quick Start 9
- MXT Display Indication 10
- Chapter 4 MXT Display 11
- Controls 16
- Chapter 5 MXT Controls 17
- TRAC Toggle 18
- Gain Control/ON-OFF 20
- Gain Adjustment 20
- Gain Adjustment (continued) 21
- Dual Control 22
- Threshold Control 25
- Threshold Adjustment 25
- Silent Search 25
- Pinpointing 26
- Headphones 27
- Field Use & Tuning Tips 28
- Chapter 6 MXT Searching 29
- Chapter 5 GMT Searching 30
- Information 34
- Chapter 7 MXT Information 35
- Warranty 36
- Warranty Transfer 37
- WARRANTY TRANSFER 37
- Owner Information 38
Manuais e produtos relacionados com Medição, teste e controlo Whites MXT
Medição, teste e controlo Whites DXF Especificações
(19 páginas)
(19 páginas)
(58 páginas)
(7 páginas)
(13 páginas)Philips HR7778/01 manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Philips HR7778/01.
Nous fournissons des manuels en pdf 2 Philips HR7778/01 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentários a estes Manuais